Great Wall Cannon Wiper Blades Size Guide

The Great Wall Cannon (also known as the GWM Cannon) is a dual-cab ute produced by Great Wall Motors, a Chinese manufacturer also operating under the GWM brand. The Cannon (2018-2024) takes a 23 inch (575mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side. Front wipers use a J-Hook connector, and the Cannon does not have a rear wiper blade. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Great Wall Cannon take?

The Great Wall Cannon (GWM Cannon) uses a 23 inch (575mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side. These sizes apply to the 2018 to 2024 model years sold in Australia.

Does the Great Wall Cannon have a rear wiper?

No, the Great Wall Cannon does not have a rear wiper blade. This ute is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Great Wall Cannon use?

The Great Wall Cannon uses a J-Hook connector on its front wiper arms. Wiper Blades Direct includes the correct J-Hook adaptor pre-assembled with every set.

Is the Great Wall Cannon the same as the GWM Cannon?

Yes. Great Wall Motors rebranded its vehicles under the GWM name in Australia, so the Cannon is sold and referred to as both the Great Wall Cannon and the GWM Cannon. The wiper blade sizes and connector type are the same regardless of the badge used.

How often should I replace Great Wall Cannon wiper blades?

Wiper blades on the Great Wall Cannon should be replaced every 12 months or sooner if streaking, skipping, or squealing becomes noticeable. The harsh Australian climate, particularly UV exposure and heat, accelerates rubber degradation, so annual replacement is the recommended minimum.

Browse all Great Wall Cannon wiper blades, return to the Great Wall wiper blades page, or visit our wiper blades size guide for all makes and models.