Hino 300 Wiper Blades Size Guide

The Hino 300 is a light-duty truck produced by Hino Motors, a Japanese commercial vehicle manufacturer operating under the Toyota Group. The Hino 300 (2001-2022) takes a 20 inch (500mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Hino 300 take?

The Hino 300 (2001-2022) takes a 20 inch (500mm) blade on both the driver side and the passenger side. Both blades are the same size across the full production run. The correct sizes can be confirmed on the product page.

Does the Hino 300 have a rear wiper?

No, the Hino 300 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Hino 300 use?

The Hino 300 uses a J-Hook connector, the most common wiper blade connector available. J-Hook compatible blades are widely stocked and come pre-assembled with the adapter fitted.

Is the Hino 300 the same vehicle as the Hino Dutro?

Yes, the Hino 300 and the Hino Dutro are closely related. Outside Japan, the Dutro is often sold as the 300 series. Both share the same platform and wiper blade specifications, taking matched 20 inch (500mm) blades on both the driver and passenger sides.

How often should I replace Hino 300 wiper blades?

Hino 300 wiper blades should be replaced approximately every 12 months, or whenever streaking, juddering, or squeaking is noticed. Trucks operating in dusty or high-rainfall conditions may require more frequent replacement. Inspecting blades at each service is recommended.

Browse all Hino 300 wiper blades, return to the Hino wiper blades page, or visit our wiper blades size guide for all makes and models.