Hino 500 Wiper Blades Size Guide

The Hino 500 is a medium-duty truck manufactured by Hino Motors, a Japanese commercial vehicle brand and subsidiary of Toyota. The Hino 500 (2003-2022) takes a 26 inch (650mm) blade on the driver side and a 26 inch (650mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Hino 500 take?

The Hino 500 (2003-2022) takes a 26 inch (650mm) blade on both the driver side and the passenger side. Both blades are the same size, making replacement straightforward. The correct sizes can be confirmed on the product page.

Does the Hino 500 have a rear wiper?

No, the Hino 500 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Hino 500 use?

The Hino 500 uses a J-Hook connector, which is the most common wiper blade connector on the market. J-Hook adapters are widely available and pre-assembled on compatible replacement blades.

Why do both wiper blades on the Hino 500 measure the same size?

The Hino 500 uses a parallel wiper sweep pattern typical of medium-duty trucks, where both driver and passenger blades cover equal areas of the wide flat windscreen. This means both the driver and passenger blades are 26 inches (650mm), unlike most passenger cars where the driver blade is longer.

How often should I replace Hino 500 wiper blades?

Hino 500 wiper blades should be replaced every 12 months as a general guide, or sooner if streaking, skipping, or squeaking occurs. Trucks in heavy use or regions with frequent rain may need replacement more often. Checking the blades at each service interval is a good habit.

Browse all Hino 500 wiper blades, return to the Hino wiper blades page, or visit our wiper blades size guide for all makes and models.