Hino Dutro Wiper Blades Size Guide
The Hino Dutro is a light commercial truck manufactured by Hino Motors, produced as a badge-engineered variant of the Toyota Dyna and sold under the Dutro name across multiple markets. The Dutro (1999-2022) takes a 20 inch (500mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side across both production generations. Front wipers use a J-Hook connector, and the model does not have a rear wiper. Find your vehicle year in the table below.
Truck (1999-2011)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1999 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2000 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2001 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2002 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2003 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2004 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2005 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2006 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2007 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2008 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2009 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2010 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2011 | 20" (500mm) | 20" (500mm) | Buy Now |
Truck (2011-2022)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2011 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2012 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2013 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2014 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2015 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2016 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2017 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2018 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2019 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2020 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2021 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2022 | 20" (500mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Hino Dutro take?
The Hino Dutro takes a 20 inch (500mm) blade on both the driver side and the passenger side across both the 1999-2011 and 2011-2022 generations. The wiper sizes are consistent across both generations. The correct sizes can be confirmed on the relevant product page.
Does the Hino Dutro have a rear wiper?
No, the Hino Dutro does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the Hino Dutro use?
The Hino Dutro uses a J-Hook connector across both the first and second generation models. J-Hook is the most common wiper connector type, and compatible replacement blades come pre-assembled with the adapter.
Are the wiper blades the same size on the first and second generation Hino Dutro?
Yes, the wiper blade sizes are the same across both Dutro generations. Both the 1999-2011 and 2011-2022 Dutro take matched 20 inch (500mm) blades on the driver and passenger sides, and both generations use the same J-Hook connector type.
How often should I replace Hino Dutro wiper blades?
Hino Dutro wiper blades should be replaced approximately every 12 months, or sooner if visibility is reduced by streaking, skipping, or squeaking. Commercial trucks in frequent use or wet climates may need more regular blade changes. Inspecting blades at each service is a recommended habit.
Browse all Hino Dutro wiper blades, return to the Hino wiper blades page, or visit our wiper blades size guide for all makes and models.
