Holden Adventra Wiper Blades Size Guide

The Holden Adventra is a full-size all-wheel drive station wagon based on the Commodore platform, produced under the VY and VZ series codes. The Adventra (VY VZ, 2003-2006) takes a 22 inch (550mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Adventra take?

The Holden Adventra (VY VZ, 2003-2006) takes a 22 inch (550mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. These are sold as a front pair.

Does the Holden Adventra have a rear wiper?

No, the Holden Adventra does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Adventra use?

The Holden Adventra uses a J-Hook wiper connector on both front arms. This is the same connector type used across the VY and VZ Commodore range, making replacement blades widely available.

Is the Holden Adventra the same as a Commodore station wagon?

The Adventra shares the VY and VZ Commodore platform and body shell but was fitted with an all-wheel drive system and raised suspension, distinguishing it from the standard Commodore wagon. Wiper sizes are the same as other VY/VZ variants of similar body type.

How often should I replace Holden Adventra wiper blades?

Wiper blades on the Holden Adventra should be replaced every 12 months or sooner if streaking, squeaking, or reduced visibility is noticed. The harsh Australian climate, including UV exposure and heat, accelerates rubber deterioration.

Browse all Holden Adventra wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.