Holden Monaro Wiper Blades Size Guide

The Holden Monaro is a two-door coupe based on the Commodore platform, revived for 2001 and produced across the V2 and VZ series. The Monaro (V2 VZ, 2001-2006) takes a 22 inch (550mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Monaro take?

The Holden Monaro (V2 VZ, 2001-2006) takes a 22 inch (550mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. These are sold as a front pair.

Does the Holden Monaro have a rear wiper?

No, the Holden Monaro does not have a rear wiper blade. This coupe is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Monaro use?

The Holden Monaro uses a J-Hook wiper connector on both front arms. This connector type is shared across the VY and VZ Commodore range, including the Monaro coupe variant.

What is the difference between the Holden Monaro V2 and VZ?

V2 is the series code for the first Monaro production run from 2001 to 2004, while VZ covers the updated model from 2004 to 2006 with revised styling and powertrain options. Both V2 and VZ Monaros use the same 22 inch driver and 20 inch passenger wiper blades with a J-Hook connector.

How often should I replace Holden Monaro wiper blades?

Wiper blades on the Holden Monaro should be replaced every 12 months or sooner if streaking, squeaking, or smearing is noticed. Keeping blades in good condition is important on a coupe with a relatively low and raked windscreen.

Browse all Holden Monaro wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.