Holden Tigra Wiper Blades Size Guide

The Holden Tigra is a two-door convertible based on the Opel Tigra Twin Top, sold briefly in Australia under the Holden badge with the XC series designation. The Tigra (XC, 2005-2006) takes a 19 inch (475mm) blade on both the driver side and the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Tigra take?

The Holden Tigra (XC, 2005-2006) takes a 19 inch (475mm) blade on both the driver side and the passenger side. Both blades are the same size, which simplifies ordering and replacement.

Does the Holden Tigra have a rear wiper?

No, the Holden Tigra does not have a rear wiper blade. This convertible is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Tigra use?

The Holden Tigra uses a J-Hook wiper connector on both front arms. This is a standard connector type that is widely available across aftermarket replacement blades.

Is the Holden Tigra the same as the Opel Tigra?

Yes, the Holden Tigra XC is the Australian-market version of the Opel Tigra Twin Top, a compact convertible built on the Corsa C platform. Both share the same wiper blade sizes and connector type.

How often should I replace Holden Tigra wiper blades?

Wiper blades on the Holden Tigra should be replaced every 12 months or sooner if streaking, squeaking, or smearing is noticed. On a convertible that may spend extended periods with the top down, blades can also dry out faster if left exposed to sun.

Browse all Holden Tigra wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.