Holden Trax Wiper Blades Size Guide

The Holden Trax is a subcompact SUV produced by GM Korea, sold in Australia under the Holden brand. The Trax (TJ, 2013-2020) takes a 26 inch (650mm) blade on the driver side and a 13 inch (325mm) blade on the passenger side, a notably asymmetric fitment compared to most other SUVs in the segment. Front wipers use a Push Button connector, and the model does not have a rear wiper blade. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Trax take?

The Holden Trax (TJ, 2013-2020) takes a 26 inch (650mm) blade on the driver side and a 13 inch (325mm) blade on the passenger side. The large size difference between the driver and passenger blades is a distinctive feature of this model.

Does the Holden Trax have a rear wiper?

No, the Holden Trax does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Trax use?

The Holden Trax uses a Push Button connector on the front wiper arms. This connector type requires pressing a release button to detach the blade from the arm during installation.

Why does the Holden Trax have such an unusual wiper size combination?

The Holden Trax has a 26 inch driver blade and a 13 inch passenger blade, which is an unusually large difference between the two sides. This fitment is set by the vehicle's wiper arm geometry and windscreen curvature, and is consistent with the global Chevrolet Trax on which the Holden Trax is based.

How often should I replace Holden Trax wiper blades?

Holden Trax wiper blades should be replaced every 12 months or sooner if reduced wipe quality is noticed. The short 13 inch passenger blade can be easy to overlook, so both blades should be checked and replaced at the same time.

Browse all Holden Trax wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.