Holden Ute Wiper Blades Size Guide
The Holden Ute is a coupe utility produced by Holden as a two-door variant of the Commodore, spanning four series from 2000 to 2017. Front wiper sizes and connector types change between series: VU and VY VZ models (2000-2007) use a J-Hook connector, while VE and VF models (2007-2017) use a Pinch Tab connector. Blade sizes also differ, with VU and VY VZ taking 22 inch (550mm) driver and 20 inch (500mm) passenger, and VE and VF taking 26 inch (650mm) driver and 15 inch (375mm) passenger. No Holden Ute series is fitted with a rear wiper. Find your vehicle year in the table below.
Ute (VU)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2000 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2001 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2002 | 22" (550mm) | 20" (500mm) | Buy Now |
Ute (VY VZ)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2002 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2003 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2004 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2005 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2006 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2007 | 22" (550mm) | 20" (500mm) | Buy Now |
Ute (VE)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2007 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2008 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2009 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2010 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2011 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2012 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2013 | 26" (650mm) | 15" (375mm) | Buy Now |
Ute (VF)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2013 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2014 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2015 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2016 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2017 | 26" (650mm) | 15" (375mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Holden Ute take?
Wiper blade sizes differ by series. The VU (2000-2002) and VY VZ (2002-2007) take a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade. The VE (2007-2013) and VF (2013-2017) take a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. Use the table above to confirm your year and series.
Does the Holden Ute have a rear wiper?
No, the Holden Ute does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the Holden Ute use?
The connector type changes between generations. VU and VY VZ series Utes (2000-2007) use a J-Hook connector. VE and VF series Utes (2007-2017) use a Pinch Tab connector. Ensure replacement blades include the correct adaptor for your series.
Is the connector the same on the Holden Ute and the Holden Commodore of the same year?
Yes, the Holden Ute shares its front wiper arm connector with the equivalent Commodore series. VT, VX, VY and VZ Commodores use J-Hook, and VE and VF Commodores use Pinch Tab, matching the Ute specifications above.
How often should I replace Holden Ute wiper blades?
Holden Ute wiper blades should be replaced every 12 months, or when streaking or reduced visibility is noticed. Utes used in work or outdoor environments may be exposed to dust, mud and UV radiation more frequently, which can accelerate rubber deterioration. Regular inspection at each service is recommended.
Browse all Holden Ute wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.
