Holden Vectra Wiper Blades Size Guide
The Holden Vectra is a mid-size passenger car produced by Opel, a General Motors subsidiary, and sold in Australia under the Holden badge. Wiper blade sizes vary across the JR JS and ZC series, and across body types, so it is important to identify your vehicle's series and body type before purchasing. Front wipers on all Vectra variants use a J-Hook connector. Find your vehicle year in the table below.
Sedan (JR JS)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1997 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1998 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1999 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2000 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2001 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2002 | 19" (475mm) | 19" (475mm) | Buy Now |
Hatchback (JR JS)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1997 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1998 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1999 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2000 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2001 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2002 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2003 | 19" (475mm) | 19" (475mm) | Buy Now |
Station Wagon (JR JS)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1998 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1999 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2000 | 19" (475mm) | 19" (475mm) | Buy Now |
Sedan (ZC)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2002 | 24" (600mm) | 18" (450mm) | Buy Now |
| 2003 | 24" (600mm) | 18" (450mm) | Buy Now |
| 2004 | 24" (600mm) | 18" (450mm) | Buy Now |
| 2005 | 24" (600mm) | 18" (450mm) | Buy Now |
| 2006 | 24" (600mm) | 18" (450mm) | Buy Now |
Hatchback (ZC)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2002 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2003 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2004 | 22" (550mm) | 18" (450mm) | Buy Now |
Hatchback (ZC Facelift)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2005 | 24" (600mm) | 18" (450mm) | Buy Now |
| 2006 | 24" (600mm) | 18" (450mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Holden Vectra take?
Wiper blade sizes vary by series and body type. JR JS Sedan, Hatchback and Station Wagon (1997-2003) take 19 inch (475mm) on both driver and passenger sides. ZC Sedan (2002-2006) and ZC Facelift Hatchback (2005-2006) take 24 inch (600mm) driver and 18 inch (450mm) passenger. ZC Hatchback (2002-2004) takes 22 inch (550mm) driver and 18 inch (450mm) passenger.
Does the Holden Vectra have a rear wiper?
Rear wiper fitment varies by body type. Hatchback variants (JR JS and ZC) are fitted with a rear wiper as standard. Sedan and Station Wagon variants do not have a rear wiper. Confirm the rear specification on the product page for your specific variant.
What wiper connector does the Holden Vectra use?
All Holden Vectra models use a J-Hook connector on the front wiper arms. This is one of the most common wiper arm connector types and is straightforward to fit. Replacement blades with J-Hook adaptor pre-fitted are available for all Vectra variants listed above.
Is the Holden Vectra based on a European model?
Yes, the Holden Vectra is a badge-engineered version of the Opel Vectra, a mid-size car produced by Opel in Germany. The JR JS series corresponds to the Opel Vectra B, and the ZC series corresponds to the Opel Vectra C. Wiper blade sizes align with their Opel equivalents.
How often should I replace Holden Vectra wiper blades?
Wiper blades on a Holden Vectra should be replaced every 12 months as a general guideline, or sooner if streaking, skipping or squeaking is noticeable during use. Australian conditions including UV exposure, heat and dust can accelerate rubber deterioration, so inspecting blades at each service interval is good practice.
Browse all Holden Vectra wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.
