The Honda CR-X is a lightweight two-seat hatchback produced by Honda, based on the Civic platform and known for its sporty character and fuel efficiency. The CR-X (ED EE, 1987-1992) takes matching 19 inch (475mm) blades on both sides, while the later EG EH series (1992-1998) takes a 20 inch (500mm) driver blade and an 18 inch (450mm) passenger blade. Front wipers on both CR-X variants use a J-Hook connector, and neither series is fitted with a rear wiper. Find your vehicle year in the table below.

Hatchback (ED EE)

Year Driver Side Passenger Side Buy and Save 50% Off RRP
1987 19" (475mm) 19" (475mm) Buy Now
1988 19" (475mm) 19" (475mm) Buy Now
1989 19" (475mm) 19" (475mm) Buy Now
1990 19" (475mm) 19" (475mm) Buy Now
1991 19" (475mm) 19" (475mm) Buy Now
1992 19" (475mm) 19" (475mm) Buy Now

Hatchback (EG EH)

Year Driver Side Passenger Side Buy and Save 50% Off RRP
1992 20" (500mm) 18" (450mm) Buy Now
1993 20" (500mm) 18" (450mm) Buy Now
1994 20" (500mm) 18" (450mm) Buy Now
1995 20" (500mm) 18" (450mm) Buy Now
1996 20" (500mm) 18" (450mm) Buy Now
1997 20" (500mm) 18" (450mm) Buy Now
1998 20" (500mm) 18" (450mm) Buy Now

Frequently Asked Questions

What size wiper blades does a Honda CR-X take?

The CR-X (ED EE, 1987-1992) uses two matching 19 inch (475mm) blades. The later CR-X (EG EH, 1992-1998) uses a 20 inch (500mm) driver blade and an 18 inch (450mm) passenger blade. Confirming the series code ensures the correct sizes are ordered.

Does the Honda CR-X have a rear wiper?

No, the Honda CR-X does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Honda CR-X use?

The Honda CR-X uses a J-Hook connector on both front wiper arms. This connector type is standard across both the ED EE and EG EH generations and is compatible with aftermarket J-Hook replacement blades without the need for additional adaptors.

Were the ED EE and EG EH Honda CR-X models sold in Australia?

Both generations of the Honda CR-X were available in Australia as parallel imports rather than official Honda Australia stock vehicles, as Honda Australia did not bring the CR-X to market locally. This means fewer service records and wiper specifications in local databases, making the sizes listed here particularly useful for owners sourcing replacement blades.

How often should I replace Honda CR-X wiper blades?

Honda CR-X wiper blades should be replaced every 12 months or when streaking, reduced visibility, or squeaking becomes apparent. Given the age of these vehicles, checking blade condition more frequently is advisable as older wiper arms may also affect blade contact and performance.

Browse all Honda CR-X wiper blades, return to the Honda CR-X wiper blades page, or visit our wiper blades size guide for all makes and models.