HSV Clubsport Wiper Blades Size Guide

The HSV Clubsport is a high-performance sedan and station wagon produced by Holden Special Vehicles, built on successive Holden Commodore platforms. The Clubsport (1993-2017) wiper blade sizes vary by series and body type; refer to the tables below for the correct sizes for your vehicle. The connector type on the front wipers varies by series, from J-Hook on VR through VZ models to Pinch Tab on E Series and GEN-F/GEN-F2 models. Station wagon variants are fitted with a rear wiper blade as standard. Find your vehicle year in the table below.

Sedan (E Series)

Station Wagon (E Series)

Sedan (GEN-F GEN-F2)

Station Wagon (GEN-F GEN-F2)

Sedan (VT VX)

Sedan (VY VZ)

Sedan (VR VS)

Station Wagon (VR VS)

Frequently Asked Questions

What size wiper blades does an HSV Clubsport take?

The HSV Clubsport wiper blade sizes vary by series. Earlier models from the VR/VS era take 20 inch (500mm) blades on both sides, VT/VX and VY/VZ variants take a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade, and E Series and GEN-F/VF variants take a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. Check the table above for the correct sizes for your year.

Does the HSV Clubsport have a rear wiper?

It depends on the body type. HSV Clubsport station wagon variants are fitted with a rear wiper blade as standard. On VR/VS wagons the rear blade is 16 inches (400mm), while on E Series and GEN-F/GEN-F2 wagons it is 12 inches (300mm). Sedan variants do not have a rear wiper blade.

What wiper connector does the HSV Clubsport use?

The connector type depends on the series. VR, VS, VT, VX, VY, and VZ series HSV Clubsport models use a J-Hook connector on the front wipers. E Series models built on the VE Commodore platform, and GEN-F, GEN-F2, and VF models built on the VF Commodore platform, use a Pinch Tab connector. Using the correct connector ensures the blades click securely into place during installation.

Are HSV Clubsport wiper blades the same as Holden Commodore wiper blades?

In most cases, yes. The HSV Clubsport is built on successive Holden Commodore platforms, so the wiper blade sizes and connector types match those of the equivalent Commodore series. For example, E Series Clubsport models share the VE Commodore platform and use the same 26 inch driver and 15 inch passenger blades with a Pinch Tab connector. It is always best to confirm using the vehicle-specific fitment listed above.

How often should I replace HSV Clubsport wiper blades?

Wiper blades on an HSV Clubsport should generally be replaced every 12 months or sooner if the blades begin to streak, skip, or leave smears on the windscreen. In harsh Australian conditions, particularly in areas with intense UV exposure, blades may need replacing more frequently as the rubber deteriorates faster. Inspecting blades at each service interval is a practical way to stay ahead of any deterioration.

Browse all HSV Clubsport wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.