HSV XU8 Wiper Blades Size Guide
The HSV XU8 is a Holden Special Vehicles performance sedan based on the Holden Commodore VT platform, fitted with a V8 engine as the performance counterpart to the six cylinder XU6. The XU8 (VT, 1999-1999) takes a 22" (550mm) blade on the driver side and a 20" (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model is not fitted with a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1999 | 22" (550mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a HSV XU8 take?
A HSV XU8 (1999-1999) takes a 22" (550mm) wiper blade on the driver side and a 20" (500mm) wiper blade on the passenger side. These sizes can be confirmed in the specifications table on the product page.
Does the HSV XU8 have a rear wiper?
No, the HSV XU8 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the HSV XU8 use?
The HSV XU8 uses a J-Hook style front wiper connector. This connector type is pre assembled on the replacement blades, so no separate adaptor purchase is required.
Does the HSV XU8 use the same blades as the six cylinder XU6?
Yes, the HSV XU8 uses the same wiper blade sizes and connector type as the six cylinder XU6 from the same VT generation, since both models share the same Commodore based body and windscreen dimensions.
How often should I replace HSV XU8 wiper blades?
Wiper blades on a HSV XU8 should generally be replaced every 6 to 12 months, or sooner if streaking, skipping or noise becomes noticeable. Driving conditions and exposure to sun and harsh Australian weather can shorten the usable life of the rubber, so a visual check before winter is recommended.
Browse all HSV XU8 wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.
