Hyundai i20 N Wiper Blades Size Guide
The Hyundai i20 N is a performance light hatchback developed by Hyundai's N division, based on the third generation i20. The i20 N (BC3, 2021-2025) takes a 24 inch (600mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side. Front wipers use a pinch tab connector, and the model is fitted with a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2021 | 24" (600mm) | 16" (400mm) | Buy Now |
| 2022 | 24" (600mm) | 16" (400mm) | Buy Now |
| 2023 | 24" (600mm) | 16" (400mm) | Buy Now |
| 2024 | 24" (600mm) | 16" (400mm) | Buy Now |
| 2025 | 24" (600mm) | 16" (400mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Hyundai i20 N take?
The Hyundai i20 N (BC3, 2021-2025) takes a 24 inch (600mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side. These sizes apply to every model year in the table above.
Does the Hyundai i20 N have a rear wiper?
Yes, the Hyundai i20 N is fitted with a rear wiper blade. The rear blade is 12 inches (300mm) and can be bought with the front pair or on its own.
What wiper connector does the Hyundai i20 N use?
The Hyundai i20 N uses a pinch tab connector on its front wiper arms. The blade clips onto a flat arm end and is released by squeezing the tabs on the adaptor.
Does the i20 N use the same wiper connector as other Hyundai models?
No, the i20 N uses a pinch tab connector, while the other Hyundai models in these size guides use a J-hook. Blades made for a J-hook arm will not fit the i20 N without the correct adaptor.
How often should I replace Hyundai i20 N wiper blades?
Hyundai i20 N wiper blades should be replaced about every 12 months, or sooner if they streak or lift at speed. Clear vision matters on a car driven hard, so replace blades as soon as they start to chatter.
Browse all Hyundai i20 N wiper blades, return to the Hyundai wiper blades page, or visit our wiper blades size guide for all makes and models.
