Maserati 3200GT Wiper Blades Size Guide

The Maserati 3200GT is a grand tourer coupe built in Italy, sitting at the entry point of Maserati's modern era GT lineup before the model was succeeded by the 4200GT. The 3200GT (1999-2002) takes a 22 inch (550mm) blade on the driver side and a 22 inch (550mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model is not fitted with a rear wiper. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Maserati 3200GT take?

The Maserati 3200GT (1999-2002) takes a 22 inch (550mm) blade on the driver side and a 22 inch (550mm) blade on the passenger side. Exact fitment can vary slightly by production year, so checking the table above is recommended before ordering.

Does the Maserati 3200GT have a rear wiper?

No, the Maserati 3200GT does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Maserati 3200GT use?

The Maserati 3200GT uses a J-Hook connector on the front wipers. Confirming the connector type before ordering helps ensure the replacement blades click straight onto the factory wiper arms without modification.

What windscreen wiper kit fits the Maserati 3200GT?

The Maserati 3200GT requires a front pair only kit, sold as a matching set rather than a single blade. Owners should always check the year of their specific vehicle before ordering, as Maserati made small specification changes across the production run.

How often should I replace Maserati 3200GT wiper blades?

Wiper blades on the Maserati 3200GT should generally be replaced every 6 to 12 months, depending on exposure to sun and storms. Streaking, skipping, or a squeaking noise during operation are all signs the blades need replacing sooner.

Browse all Maserati 3200GT wiper blades, return to the Maserati wiper blades page, or visit our wiper blades size guide for all makes and models.