Mazda 626 Wiper Blades Size Guide
The Mazda 626 is a mid-size sedan and hatchback that Mazda sold in Australia through the 1990s and early 2000s, sitting above the 323 in the model lineup at the time. The most recent GF series (1997-2002) takes a 21 inch (525mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side, though sizes vary by generation and body type. Front wipers use a J-Hook connector across both generations, and rear wiper fitment depends on body type, as detailed below. Find your vehicle year in the table below.
Hatchback (GE)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1991 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1992 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1993 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1994 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1995 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1996 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1997 | 20" (500mm) | 20" (500mm) | Buy Now |
Sedan (GE)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1991 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1992 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1993 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1994 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1995 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1996 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1997 | 21" (525mm) | 20" (500mm) | Buy Now |
Hatchback (GF)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1997 | 21" (525mm) | 18" (450mm) | Buy Now |
| 1998 | 21" (525mm) | 18" (450mm) | Buy Now |
| 1999 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2000 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2001 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2002 | 21" (525mm) | 18" (450mm) | Buy Now |
Sedan (GF)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1997 | 21" (525mm) | 18" (450mm) | Buy Now |
| 1998 | 21" (525mm) | 18" (450mm) | Buy Now |
| 1999 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2000 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2001 | 21" (525mm) | 18" (450mm) | Buy Now |
| 2002 | 21" (525mm) | 18" (450mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Mazda 626 take?
The Mazda 626 takes a 20 inch (500mm) to 21 inch (525mm) driver side blade depending on generation, with passenger side sizes ranging from 18 inch (450mm) on the later GF series to 20 inch (500mm) on the earlier GE series. Owners should match their generation and body type to the table above.
Does the Mazda 626 have a rear wiper?
Sedan variants of the Mazda 626 use two front wiper blades only and have no rear wiper, which has been confirmed on the GF sedan's specifications. Hatchback variants are fitted with a rear wiper blade as standard, sold separately from the front pair, with the exact rear size available on each hatchback's product page.
What wiper connector does the Mazda 626 use?
Both generations of the Mazda 626 sold in Australia use a J-Hook front wiper connector, a common adaptor type that suits most aftermarket replacement blades without needing a separate adaptor kit.
Are Mazda 626 GE and GF wiper sizes interchangeable?
The GE (1991-1997) and GF (1997-2002) generations of the Mazda 626 have different windscreen shapes and wiper arm lengths, so their blade sizes are not interchangeable. Owners replacing wipers on either generation should check the build year and series before ordering to avoid an incorrect fit.
How often should I replace Mazda 626 wiper blades?
Wiper blades on a Mazda 626 should generally be replaced every 6 to 12 months, depending on UV exposure and how often the vehicle is driven in wet weather. Streaking or a juddering noise during operation are common signs that replacement is due.
Browse all Mazda 626 wiper blades, return to the Mazda wiper blades page, or visit our wiper blades size guide for all makes and models.
