Mazda CX-3 Wiper Blades Size Guide
The Mazda CX-3 is a compact SUV positioned below the CX-30 in Mazda's lineup, built on the same platform as the Mazda 2. The CX-3 (DK, 2015-2023) takes a 22" (550mm) blade on the driver side and a 18" (450mm) blade on the passenger side. Front wipers use a standard hook-style connector, and the model is fitted with a rear wiper as standard. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2015 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2016 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2017 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2018 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2019 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2020 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2021 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2022 | 22" (550mm) | 18" (450mm) | Buy Now |
| 2023 | 22" (550mm) | 18" (450mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Mazda CX-3 take?
The Mazda CX-3 built from 2015 to 2023 takes a 22 inch (550mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side. Both blades use the same hook-style connector, making replacement straightforward. This size applies across the full model range.
Does the Mazda CX-3 have a rear wiper?
Yes, the Mazda CX-3 is fitted with a rear wiper blade as standard. The rear blade is 10 inches (250mm) and is sold separately from the front pair. Replacing all three blades at the same time helps maintain consistent visibility.
What wiper connector does the Mazda CX-3 use?
The Mazda CX-3 uses a standard hook-style, or J-Hook, connector on both front wiper arms. This connector type is common across most Mazda models, so fitting a replacement blade is generally straightforward. No special adaptors are needed for this model.
Does the Mazda CX-3 wiper size change across the model range?
No, the Mazda CX-3 kept the same driver and passenger blade sizes throughout its production run from 2015 to 2023. This makes finding a replacement straightforward regardless of the exact build year. The table above confirms the size if there is any doubt.
How often should I replace Mazda CX-3 wiper blades?
Wiper blades on the Mazda CX-3 should generally be replaced every 12 months, or sooner if streaking or noise appears. The Australian climate can accelerate wear on wiper rubber due to sun exposure. Replacing the front pair and rear blade together helps keep visibility consistent in all conditions.
Browse all Mazda CX-3 wiper blades, return to the Mazda wiper blades page, or visit our wiper blades size guide for all makes and models.
