Mitsubishi Challenger Wiper Blades Size Guide
The Mitsubishi Challenger is a body on frame SUV built on the same ladder chassis as the Triton ute, offered in Australia across two distinct generations. Driver and passenger blade sizes vary by series, with the PA series (1998-2006) taking a 19 inch (475mm) blade on both sides, and the PB series (2009-2013) taking a 22 inch (550mm) driver blade and a 17 inch (425mm) passenger blade. Front wipers on both series use a hook-style connector, and both the PA and PB are fitted with a rear wiper as standard. Find your vehicle year in the table below.
SUV (PA)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1998 | 19" (475mm) | 19" (475mm) | Buy Now |
| 1999 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2000 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2001 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2002 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2003 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2004 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2005 | 19" (475mm) | 19" (475mm) | Buy Now |
| 2006 | 19" (475mm) | 19" (475mm) | Buy Now |
SUV (PB)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2009 | 22" (550mm) | 17" (425mm) | Buy Now |
| 2010 | 22" (550mm) | 17" (425mm) | Buy Now |
| 2011 | 22" (550mm) | 17" (425mm) | Buy Now |
| 2012 | 22" (550mm) | 17" (425mm) | Buy Now |
| 2013 | 22" (550mm) | 17" (425mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Mitsubishi Challenger take?
The Mitsubishi Challenger PA series (1998-2006) takes a 19 inch (475mm) blade on both the driver and passenger side. The PB series (2009-2013) takes a 22 inch (550mm) driver blade and a 17 inch (425mm) passenger blade.
Does the Mitsubishi Challenger have a rear wiper?
Yes, both Challenger series are fitted with a rear wiper blade as standard. The PA series uses a 17 inch (425mm) rear blade, and the PB series uses a 12 inch (300mm) rear blade. Owners should replace all three blades at the same time for consistent visibility.
What wiper connector does the Mitsubishi Challenger use?
Front wipers on both the PA and PB Mitsubishi Challenger use a hook-style connector. This connector type allows for straightforward installation without tools.
Why is there a gap between the PA and PB Challenger years?
The Mitsubishi Challenger nameplate was not sold in Australia between 2006 and 2009 while Mitsubishi transitioned design, so there is a gap between the PA and PB series rather than a continuous production run. Owners should check their build plate or compliance year to confirm which series their vehicle belongs to before ordering.
How often should I replace Mitsubishi Challenger wiper blades?
Wiper blades on a Mitsubishi Challenger should generally be replaced every 12 months, or sooner if streaking, juddering or noise becomes noticeable. Regular replacement keeps all three blades performing consistently.
Browse all Mitsubishi Challenger wiper blades, return to the Mitsubishi wiper blades page, or visit our wiper blades size guide for all makes and models.
