Nissan NX Wiper Blades Size Guide

The Nissan NX is a compact coupe built in Japan during the early 1990s, sharing much of its underpinnings with the Nissan Pulsar of the same era. The NX (1990-1994) takes a 20 inch (500mm) blade on the driver side and a 19 inch (475mm) blade on the passenger side. Front wipers use a standard J-Hook connector, and the model does not have a rear wiper. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Nissan NX take?

The Nissan NX (1990-1994) takes a 20 inch blade on the driver side and a 19 inch blade on the passenger side. This size applies across the full production run of the model.

Does the Nissan NX have a rear wiper?

No, the Nissan NX does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Nissan NX use?

The Nissan NX uses a standard J-Hook front wiper connector, which makes fitting a replacement pair a straightforward job.

Is the Nissan NX the same as the Nissan Pulsar?

Not quite. The NX is a two door coupe variant that shares its platform and much of its mechanical layout with the Pulsar hatchback and sedan sold in the same period, but it was marketed as a distinct sportier model with its own body and trim.

How often should I replace Nissan NX wiper blades?

Nissan NX wiper blades should generally be replaced every 12 months, or sooner if streaking, skipping or noise develops. As the NX is now over 30 years old, checking the rubber condition regularly is recommended.

Browse all Nissan NX wiper blades, return to the Nissan wiper blades page, or visit our wiper blades size guide for all makes and models.