Nissan Skyline Wiper Blades Size Guide

The Nissan Skyline is a compact executive car line built in Japan, spanning several generations of sedan and coupe body styles and best known internationally for its performance oriented GT-R variants. Across generations the Skyline takes a driver side blade between 20 inch (500mm) and 24 inch (600mm) and a passenger side blade between 17 inch (425mm) and 22 inch (550mm), with the exact sizes depending on generation and body style. Front wipers use a standard J-Hook connector on every generation, and only the R33 series is fitted with a rear wiper as standard. Find your vehicle year in the table below.

Coupe (R31 GTS-T GTR GTS)

Coupe (R32 GTS-T GTR GTS)

Coupe (R33 GTS-T GTR GTS)

Coupe (R34 GTT GTR)

Sedan (R34 GTT)

Sedan (V35)

Frequently Asked Questions

What size wiper blades does a Nissan Skyline take?

Sizes vary by generation. The R31 and R32 use a 20 inch driver blade, the R33 and R34 Coupe also use a 20 inch driver blade with a 17 inch passenger blade, the R34 Sedan uses 22 inch blades on both sides, and the V35 uses a 24 inch driver blade with a 17 inch passenger blade. Check the table above for the exact fitment for your model year.

Does the Nissan Skyline have a rear wiper?

It depends on the generation. The R33 GTS-T GTR GTS is fitted with a rear wiper blade as standard, and the rear blade is 17 inches (425mm), sold separately from the front pair. The R31, R32, R34 and V35 generations are fitted with two front wiper blades only and do not have a rear wiper.

What wiper connector does the Nissan Skyline use?

Every generation covered here, from the R31 through to the V35, uses a standard J-Hook front wiper connector. This makes fitment straightforward regardless of which Skyline generation is being serviced.

Why does the Nissan Skyline V35 use different wiper sizes to earlier generations?

The V35 Skyline was a larger, heavier sedan than the R31 through R34 generations, and was also sold overseas as the Infiniti G35. Its wider windscreen calls for a longer 24 inch driver blade paired with a shorter 17 inch passenger blade, a different pairing to the more evenly matched sizes used on the earlier coupe generations.

How often should I replace Nissan Skyline wiper blades?

Nissan Skyline wiper blades should generally be replaced every 12 months, or sooner if streaking, skipping or noise appears during use. Given the age of most Skyline models on Australian roads, checking the rubber condition each service is a sensible habit.

Browse all Nissan Skyline wiper blades, return to the Nissan wiper blades page, or visit our wiper blades size guide for all makes and models.