Toyota Soarer Wiper Blades Size Guide
The Toyota Soarer is a luxury coupe built by Toyota for the Japanese domestic market, with the later generation forming the basis for the Lexus SC sold in export markets. The Soarer (1991-2000) takes a 20 inch (500mm) blade on both the driver and passenger sides, though the earlier generation uses different sized blades on each side. Front wipers use a hook-style connector across both generations, and each model is fitted with a rear wiper as standard. Find your vehicle year in the table below.
Coupe (Z20)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1986 | 19" (475mm) | 18" (450mm) | Buy Now |
| 1987 | 19" (475mm) | 18" (450mm) | Buy Now |
| 1988 | 19" (475mm) | 18" (450mm) | Buy Now |
| 1989 | 19" (475mm) | 18" (450mm) | Buy Now |
| 1990 | 19" (475mm) | 18" (450mm) | Buy Now |
Coupe (Z30)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1991 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1992 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1993 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1994 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1995 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1996 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1997 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1998 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1999 | 20" (500mm) | 20" (500mm) | Buy Now |
| 2000 | 20" (500mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota Soarer take?
The Toyota Soarer takes different wiper blade sizes depending on generation. The Z20 (1986 to 1990) uses a 19 inch (475mm) driver blade and an 18 inch (450mm) passenger blade, while the Z30 (1991 to 2000) uses a 20 inch (500mm) blade on both sides. Always match the size to the correct model year before ordering.
Does the Toyota Soarer have a rear wiper?
Yes, the Toyota Soarer is fitted with a rear wiper blade as standard on both generations. The Z20 uses a 20 inch (500mm) rear blade, while the Z30 uses an 18 inch (450mm) rear blade. Owners should replace all blades together for consistent visibility.
What wiper connector does the Toyota Soarer use?
The Toyota Soarer uses a hook style connector on the front wipers across both the Z20 and Z30 generations. This is a common fitting that does not require special adaptors. Confirming the connector type before purchase helps ensure a straightforward installation.
Why do wiper blade sizes differ between the Z20 and Z30 Soarer?
The Z20 and Z30 Soarer use different windscreen dimensions and wiper arm lengths, which is why the front and rear blade sizes change between generations. The Z30 also shares its platform with the Lexus SC300 and SC400 sold overseas. Drivers should check their specific generation rather than assuming a universal fit.
How often should I replace Toyota Soarer wiper blades?
Toyota recommends replacing wiper blades every 6 to 12 months, depending on driving conditions and exposure to sunlight. Blades exposed to harsh Australian weather, including intense UV and dust, may wear out faster and need earlier replacement. Regular inspection helps maintain clear visibility in wet conditions.
Browse all Toyota Soarer wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
