Toyota Vellfire Wiper Blades Size Guide
The Toyota Vellfire is a Japanese market luxury minivan built alongside the Toyota Alphard, offering a spacious cabin and premium trim aimed at the top end of Toyota's people mover range. The Vellfire (2010-2022) takes a 30 inch (800mm) blade on the driver side and a 14 inch (350mm) blade on the passenger side. Front wipers use a GWB044 connector, a fitting less common than the standard hook style fitted to most other Toyota models. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2010 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2011 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2012 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2013 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2014 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2015 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2016 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2017 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2018 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2019 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2020 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2021 | 30" (800mm) | 14" (350mm) | Buy Now |
| 2022 | 30" (800mm) | 14" (350mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota Vellfire take?
A Toyota Vellfire (2010-2022) takes a 30 inch (800mm) wiper blade on the driver side and a 14 inch (350mm) blade on the passenger side. These sizes apply across the full production run covered by this generation. Confirming the size against the vehicle build plate helps avoid ordering the wrong fitment.
Does the Toyota Vellfire share wiper blades with the Toyota Alphard?
The Toyota Vellfire and Toyota Alphard share the same underlying platform and are largely identical beneath their styling differences, so wiper blade sizes for the equivalent generation are often shared between the two models. Trim and import variations can still affect fitment, so checking the specific vehicle remains worthwhile. Searching by make and model on Wiper Blades Direct is the simplest way to confirm the correct size.
What wiper connector does the Toyota Vellfire use?
The Toyota Vellfire uses a GWB044 connector on its front wiper arms, which differs from the hook style fitted to most other Toyota models. This connector is designed to click straight onto the factory arm without extra adaptors. Selecting a wiper blade made specifically for this connector avoids fitment issues during installation.
Why do some online sources list different sizes for the Toyota Vellfire?
Some general parts guides list smaller sizes for the Toyota Vellfire because they mix up figures from the closely related Toyota Alphard or from earlier facelift versions. The sizes confirmed here, a 30 inch (800mm) driver side blade and a 14 inch (350mm) passenger side blade, apply to the Vellfire generation covering 2010 to 2022. Measuring the factory blades directly is the safest way to confirm sizing if there is any doubt.
How often should I replace Toyota Vellfire wiper blades?
Toyota Vellfire wiper blades should generally be replaced every 6 to 12 months, or sooner if streaking, squeaking or skipping becomes noticeable. Strong UV exposure and dusty or coastal driving conditions in Australia can accelerate rubber deterioration. Replacing both front blades together helps maintain even, consistent wiping across the windscreen.
Browse all Toyota Vellfire wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
