Toyota WISH Wiper Blades Size Guide
The Toyota WISH is a compact multi purpose vehicle produced by Toyota for the Japanese market, sitting below larger people movers such as the Estima in Toyota's range. The WISH (AE10, 2003-2009) takes a 26 inch (650mm) blade on the driver side and a 14 inch (350mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not come fitted with a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2003 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2004 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2005 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2006 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2007 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2008 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2009 | 26" (650mm) | 14" (350mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota WISH take?
A Toyota WISH (AE10, 2003-2009) takes a 26 inch (650mm) wiper blade on the driver side and a 14 inch (350mm) blade on the passenger side. These sizes apply across the AE10 generation sold during this period. Confirming the exact size against the vehicle build plate helps avoid ordering the wrong fitment.
Does the Toyota WISH have a rear wiper?
No, the Toyota WISH does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the Toyota WISH use?
The Toyota WISH uses a J-Hook connector on its front wiper arms, which is the most common fitting used across the Toyota range. This connector clips directly onto the factory arm without needing extra adaptors. Selecting a J-Hook wiper blade keeps installation straightforward.
Is the Toyota WISH sold new in Australia?
The Toyota WISH was not sold new through Toyota Australia showrooms, and most examples on Australian roads arrived as used Japanese imports. This means genuine Toyota parts can be harder to source locally, making a precision fit aftermarket wiper blade a practical alternative. Checking the compliance plate can help confirm the exact variant if there is any uncertainty.
How often should I replace Toyota WISH wiper blades?
Toyota WISH wiper blades should generally be replaced every 6 to 12 months, or sooner if streaking or juddering appears. Australian sun and dusty conditions can wear out rubber blades faster than milder climates. Replacing both front blades at the same time keeps wiping performance even across the windscreen.
Browse all Toyota WISH wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
